Configure Client via file upload

1. Create a text file (NDDPrintClientKyocera.ini) with the following information:

• hostAddress: referring to the IP or Hostname address of the server where the NDD Print Host module is installed;

• enableReleaser: Use the keys (true or false) to use secure release of documents through the NDD Print Releaser solution;

• releaserAddress: referring to the IP or Hostname address of the server where the NDD Print Releaser module is installed;

• modeConnection:

  • DCS: Connection between client and server using DCS protocol (port 5656);

  • HTTP: Connection between client and server using HTTP protocol (Nancy). By default it uses port 56562 for connection to NDD Print Host and 56563 for connection to NDD Print releaser server;

• enableCompatibleCard: conversion of the reading of the physical identifier used.

  • true: conversion to hexadecimal;

  • false: conversion to decimal.

2. Save the file to a USB stick (FAT32 format) and plug it into the device;

3. Authenticate with the administrative credentials on the device and click the NDD Print 360 icon;

4. Click the Gear icon;

5. Load the configuration by clicking Load configuration via USB;

6. After loading the data, click Test Connection to validate the data;

7. After validating the connection click OK to finish.