Prerequisites
NDD Print modules
NDD Print Portal MPS/360 (in scenarios where counters, supplies, events and/or accounting are sent) |
NDD Print Host (in scenarios where accounting is sent) |
NDD Print Releaser (in scenarios with secure release) |
NDD Orbix (in scenarios with sending counters and supplies and/or monitoring agents) |
Environment
DCS Communication Protocol released (Port 5656); |
Nancy Communication Service released - Client e Collector Lexmark - HTTPS
|
Internet Communication released to communicate with the Data Center (communication possible through proxy) (Ports 443 and 80); |
SNMP Communication released to communicate with the printing devices (Port 161). |
Starting with the versions listed below, all communications will be covered by the HTTPS and TLS 1.2 protocols.
Framework 5x
NDD Print Client Access Lexmark 5.12.0
NDD Print Client Lexmark 5.16.0
NDD Print Client Lexmark Collector 5.11.0
Printers
Check the compatible models on our Compatibility guide.
Hardware |
|---|
USB Low, Full and High Speed; |
Hard Disk. |
Printers with LesF2x 4 lines framework |
|---|
LesF2.x; |
RAM: 256 MB or higher; |
Display: 4-line. |
Printers with LesF2x framework |
|---|
RAM: 256 MB or higher; |
Display: 800 x 480 Color & Touch Screen. |
Printers with LesF3x framework |
|---|
RAM: 512 MB or higher; |
Display: 800 x 480 or 480 x 272 Color & Touch Screen. |
Printers with LesF4x or higher framework |
|---|
RAM: 1GB or higher; |
Display: 800 x 480 or 480 x 272 Color & Touch Screen. |
Permissions, Rights and Recommendations
Printer administrator account for application installation and configuration; |
Always use the latest firmware version provided by the manufacturer; |
SNMP community must have a configured name, being public by default; |
Make sure that Domain and Authentication form are configured in NDD Print Host, as well as the equipment is correctly added in a printing group in NDD Print Releaser. |