DALP Configuration

Extract the file from the compressed file nddprintClientRicoh.zip;

Open it with the notepad, find the tags <argument> and edit them, considering the information below:

1. Connection Mode: Select how the application will communicate with the servers:

   1. ModeConnection=1: port HTTP "56562" (nddPrint Host) and "56563" (nddPrint Releaser);

   2. ModeConnection=0: port DCS "5656" for both servers.

2. Server address, ports and collector's Job Monitor:

   1. HostAdress: nddPrint Host Server Address (Authentication);

   2. ReleaserAddress: nddPrint Releaser Server Address (Print files).

3. Monitoring Parameters/Configuration that will be used in the MFP (nddPrintFunctions): Enter the desired parameter to choose which features will be enabled;

   1. 1: Use only authentication (access).

   2. 2: Use authentication (access) + document retention (Releaser Client)

   3. 3: Use authentication (access) + Job Accounting/capture of counters and supplies (Collector);

   4. 4: Use authentication (access) + document retention (Releaser Client) + Job Accounting/capture of counters and supplies (Collector);

   5. 5: Use only Job Accounting/capture of counters and supplies (Collector);

4. CollectorMonitorFunctions: when the parameter nddPrintFunctions is configured as 3 or 4 configure this item with at least one of the options below:

   1. scan: Accounts scan jobs performed in the printer;

   2. fax: Accounts fax jobs performed in the printer;

   3. copy: Accounts copy jobs performed in the printer;

   4. TimeUpdate: Set the time interval in which the data collected will be sent to the Portal 360 (In hours).

5. Enterprisekey of the company registered in the Portal 360 and its address (IP or hostname):

   1. EnterpriseKey: Enter the identification key of the company;

   2. DCAddress: Address of the nddPrint Portal 360 (datacenter): "wsembedded.nddprint.com".

6. Printer's Community:

   1. SNMPCommunity: This key is not required, unless in cases where the printer's community is other than public.

7. Approximation card reading mode (ModeReadCard): Set how the application will behave when reading the cards, when used in environments with other manufacturers;

   1. 0: Specific for nddPrint Ricoh and n-Billing Ricoh (Only for N5 Prox USB);

   2. 1: nddPrint embedded applications and network readers standard reading (Only for N5 Prox USB);

   3. 2: Specific for bar code readers.

8. Monitoring of alert events on the device (MonitoringAlerts): Enable this option to send printer's alert events to the MPS Portal:

   1. 1: Enable;

   2. 2: Disable.

9. Choose primary native printer feature (10x, 11x and 12x devices): Enter which feature will open when the user press Copier after authenticating in the application.

   1. DefaultNativeFunction=1: Direct access to Copy;

   2. DefaultNativeFunction=2: Direct access to Scan;

   3. DefaultNativeFunction=0: The application will display a message informing that the user will access any native feature by clicking on the corresponding button (Home and/or physical buttons).

10. After configuring the file with all settings that will be used in the environment, save it and add to the installation package (.ZIP).

11. Follow the installation instructions. Click here.

IMPORTANT

• nddPrint Client Collector just captures copy, fax and scan jobs and send them only to the nddPrint Host;

• nddPrint Client Collector only performs the capture of jobs page-by-page, and not by jobs. (this limitation is found in 7x, 10x, 11x and 12x technologies);

• The supplies and counters captured by the nddPrint Client Collector are sent straight to the Portal 360;

• The events captured by the nddPrint Client Collector are sent straight to the MPS Portal.