Configuring the SP MODE
Before installing the embedded solution, some settings are required, being that on most of the MFP's the process will be the one described below:
CVM 7x Devices
Type the following sequence in the printer's panel: button “Clear modes”, followed by “1”, “0”, “7” and keep pressing “Clear/Stop” until it changes interface;
In this interface, access “System Sp”;
Following, access the option “SP-5XXX”;
Select “5113”, option “2” and then “Expansion Device 1”.
Restart the device.
After starting it again, press “User Tools/Counter” and access “System Settings” > “Administrator Tools” > “Enhanced Charge Unit Management”. In this interface, select the native options that you want to have it controlled by nddPrint.
Copier: “Full Color”, “Black & White”, “Single Color” and “Two-color”;
Printer: Do not mark any item from Printer;
Other Functions: “Document Server”, “Facsimile” e “Scanner”.
CVM 10x Devices
Before installing the Java Card, type the following sequence in the printer's panel: button “Reset”, followed by “1”, “0”, “7” and keep pressing “Clear” until it changes interface;
In this interface, access “System Sp”;
Following, access the option “SP-5XXX”;
Select “5113”, option “1” and then "0:None";
Select “5113”, option “2” and then “Expansion Device 1”.
Restart the device;
After starting it again, press “User Tools/Counter” and access “System Settings” > “Administrator Tools” > “Enhanced Charge Unit Management”. In this interface, select the native options that you want to have it controlled by nddPrint. Do not select nddPrint.
Copier;
Facsimile;
Scanner;
Document Server;
Browser.
CVM 11x Devices or higher
Before installing the Java Card, type the following sequence in the printer's panel: button “Reset", followed by “8”,“0”,“6”,"1","8","2" and keep pressing “C” until it changes interface;
In this interface, access “System Sp”;
Following, access the option “SP-5XXX”;
Select “5113”, option “1” and then "0:None";
Select “5113”, option “2” and then “Expansion Device 1”.
Restart the device;
After starting it again, press “User Tools/Counter” and access “System Settings” > “Administrator Tools” > “Enhanced Charge Unit Management”. In this interface, select the native options that you want to have it controlled by nddPrint. Do not select nddPrint.
Copier;
Facsimile;
Scanner;
Document Server;
Browser.
IMPORTANT
The steps to control the native features are not required when using only Collector. More information about internal configurations, please consult the service manual.
