Servers

In the tab Servers you can view and configure the address of the sever where the NDD Print Host is installed at, and to validate the communication it the server, click Test.

Select the item "Local NDD Print Host" if the NDD Print Host is installed in the same device. If it is installed in another server, type its IP Address in the available field

You can also configure the time interval (in minutes), remembering that the minimum value is 30 minutes.

ATTENTION

• After adding the printer to the MF with the embedded NDD Print active, the server addresses cannot be changed in the MF interface, since they are configured in the printer itself.

• To change addresses, you must remove all printers and add them again.