Using the nddPrint Client Brother

Os métodos de autenticação disponíveis são os presentes nos menus de configuração do servidor NDD PrintHost, sendo eles:

The available authentication methods are the ones presents in the configuration menu of the NDD Print Host:

Username and Password: In this authentication type, select the domain (if you have more than one domain registered on the NDD Print Host server) and enter your credentials.
PIN and Secure PIN: When the authentication type is configured in this way, the user must enter the PIN or PIN and Secure PIN, as registered on NDD Print Portal 360.
Physical identifier: Para To use this authentication type, the USB reader must be configured and connected to the equipment. To authenticate, bring your physical identifier close to the USB reader so your credentials are validated in the system.
Physical Identifier Registration: The physical identifiers registration can be enabled to be done by the user at the equipment, and it is necessary to validate the access credentials (using the Second Authentication type) to confirm the data.

IMPORTANT

Due to software limitations, users with the name "Admin" will not be able to authenticate to the board.

Card Registration

The card registration can be enabled to be done directly in the printer, using the access credentials to confirm the data. For this functionality, the application ought to use the External Device as primary authentication method and, as a second authentication, User and password or PIN Code.
To register, bring the identifier closer to the reader, the user will be informed that the identifier is not registered, select another form of authentication (Username and Password or PIN Code), after validating the access data, bring the identifier closer to the reader again to confirm registration.

IMPORTANT

When the purpose is only corporate (no Accounts and no Private purpose), and the SMART option on the NDD PrintReleaser server is to redirect the user directly to the copier, the user will be able to access the copy option directly through the printer's physical button, and authentication is carried out transparently, that is, there is no need to open the NDD PrintClient Brother application;
For further clarification on how to configure authentication methods, consult the NDD Print Host manual.