USB readers

Approved readers
¹DMZ MULTI-125 RFID READER;
¹DMZ MIFARE RFID READER 13,56MHz DECIMAL/HEXADECIMAL;
¹DMZ Barcode Reader;
¹DMZ Universal RFID Reader;
¹DMZ BIO READER SR DECIMAL/HEXADECIMAL;
¹DMZ BIO READER;
¹NONUS Homebank Barcode;
¹RFIDeas RDR-6081AKU;
²N5 USB 13,56MHz and 125Khz;
¹Omnikey 5427 keyboard mode;
³Omnikey 5427.

¹ Keyboard Reader: driver for USB readers in keyboard format;

² N5 Proximity Driver: driver compatible with readers N5 Prox. Reader 125 and 13,56 Hz;

³ Omnikey 5427ck driver: driver compatible with readers Omnikey 5427ck (install only on printer's with framework LesF5x and LesF6x).

Install drivers

Before connecting the reader to the printer, login with administrative credentials on the web page and follow the steps below:

Printers with LesF2x 4-line framework

Access the menu Configurations > Embedded Solutions;
On Embedded Solutions, click Install > Choose File;
Select the desired driver .fls file and click Start Installation;
Wait until the installation status is complete.

Printers with LesF2x, LesF3x and LesF4x framework

Access the menu Settings > Apps > Apps Management;
On Apps Management, click Install a New App > Choose File;
Select the desired driver .fls file and click Start;
Wait until the installation status is complete.

Printers with LesF5x or higher framework

Access the menu Apps;
Click Installed Apps;
Click Install an App;
Click Browse;
Select the driver file from the pop-up menu and click Install;
Wait until the installation status is complete.

After the process is successfully completed, the installed driver will appear in the printer Apps list, check its status. Normally starts in running mode automatically, if not, it must be done manually.

The compatibility of some reader types depends on the printer model as well as the version of the reader used. Requires compatibility testing. For more information, consult the printer manufacturer.