Configure the IP of the N5NetProx network reader
ATTENTION
Before registering, make sure that the reader is connected and available on the network.
To configure the IP address of the N5NetProx > side menu Network readers > Add > N5NetProx reader, provided by NDD > OK > please wait while the searching is running > select the reader from the displayed list > Configure ... > enter the requested data > Save
Please inform the requested data, considering that:
Serial number;
TCP port;
Time out (ms): Refers to how long the reader waits for a response from the server.
Get IP address automatically;
Set the IP address:
IP Address: Required field;
Network mask: Required field;
Default gateway: Required field.
IMPORTANT
After clicking "Save" the chosen settings will be saved immediately on the reader. If a typo occurs, the reader may stop responding or the IP range may be out of range of your server.
